Links

DIRECTIONS

Directions :

From the M5 south, take junction 25 (Taunton A358). Follow the first exit off the roundabout (A358 Chard).

Follow A358 to Chard.

Follow the road into Chard, past Focus carry straight on, and there is a Church on the left hand side by the set of traffic lights. At the lights follow the road straight on until you come to a roundabout. Millfield Estate is on the first exit on the left.

From the A30 traveling west, follow the road into Chard, past the Tesco supermarket on the left hand side. At the small roundabout follow the road straight across and just by the set of traffic lights by the car dealers (Central Motors) take the left hand turn and follow the road until the small roundabout. Take the first turning and you will enter Millfield Estate.

We are approximately ½ mile down the road on the right hand side. We are on the corner of the turning to Willoughby Close.

Map Of Somerset

09/03/2010 16:03

Latest News:

09.03.2010

Read Our Technical Article on Micro-Abrasive Applications in Micromachining in the latest Commercial Micro Manufacturing Magazine.

14.01.2010 Southern Manufacturing Show. Epak Electronics Will be exhibiting at Southern Manufacturing in Farnborough 10th & 11th February 2010.

#500 Exhibitors

# FREE Tickets (when pre-booked)

# FREE Parking

# FREE Seminars

21.10.09 Epak Custom Large Fossil Blast Cleaning Cabinet

18.09.09 Epak BV9000 Wafer Beveller Installed

Our latest custom project to build a larger scale Wafer beveller based around the Comco BV8003 has been delivered and installed.

Designed to take from 30mm to 150mm (6") wafers.

16.04.09 Comco to Exhibit at InterSolar Munich

Comco Inc. will exhibit micro-abrasive blasting equipment at the InterSolar Munich show, May 27-29, 2009, New Trade Fair Center, Munich, Germany booth A3.208.

11.01.09

27.10.08 SPT RTR-D2/D3 series pickup tips for thin or fragile components

14.10.08 Safe-T-Stain : We are able to source all the Safe-T-Stains again in 8oz bottles.

18.04.08 NEW from AI Technology : COOL-SILVER^{TM CPU
Thermal Grease gives 2-3
degree centigrade lower temperatures over the industry
"standards" even for a medium performing CPS for longer life
of the processors and electronic devices.}

19.03.08 : New Website Launched