|
|
|
Diamond Wheel Dressing Solution Resistors - Thin Film Microwave & RF Solitec Spinners, Coaters and Developer support Storage Cabinets (Dry / Nitrogen & Custom) Tapes (Wafer, Dicing & Protective) Tape / Film Applicator / Mounters UV Curing Control & Test Equipment
Links
|
SPEED MONITORS : TACHOMETERS & STROBOSCOPESRadiation exposure level is inversely related to process speed: the slower the product travels under the lamp(s), the more radiation to which it is exposed. Measuring substrate speed through the UV curing unit with a tachometer or interval timer can help ensure uniform drying. COMBO PHOTO TACHOMETER STROBOSCOPE
The Combination Photo Tachometer/Stroboscope is a battery operated meter that performs both tachometer RPM measurement and stroboscopic speed and motion analysis. This microprocessor based unit has a quartz crystal oscillator to maintain high accuracy. The stroboscope features coarse and fine flash rate adjustments in 3 ranges to allow maximum flexibility and precision. The large 0.4" 5 digit digital LCD displays characters reverse direction depending on the measurement mode selected. The tachometer memory stores last, maximum, and minimum readings. M004-015 TACHOMETER/STROBOSCOPEM004-016 TACHOMETER/STROBOSCOPE WITH NIST
Digital
Strobotach is ideal for measuring speed of conveyor belts,
webs, motors, fans, and other equipment for verifying
performance parameters. Freeze-motion action accurately
measures speed without contact. It checks and analyzes
motion and speed by synchronizing flash rate (FPM) with a
targeted object. HUMIDITY AND TEMPERATURE STOP WATCH
The digital Humidity/Thermometer Stopwatch has an up/down timer that displays temperature, humidity, and heat index. It features a user settable heat index alarm, fastest/slowest/average lap recall, and a programmable alarm. M015-055 STOPWATCH
The perfect
pocket tool for rpm and surface speed measurements. M004-021PEED:MINI
CONTACT TACH DIGITAL PROGRAMMABLE STROBOSCOPE TACHOMETER
The Programmable Digital Stroboscope/Tachometer has a microprocessor design for both speed and motion analysis of gears, fans, pumps, motors, and similar equipment. The intelligent microprocessor design provides special functions such as: stop motion function at 2:1, 3:1, 4:1 for harmonics, coarse and fine adjustments via keypad, and phase shift (phase delay) adjustment to offset the strobes. Flashing signal is displayed in degrees and milliseconds for advanced motion analysis. M004-017 DIGITAL STROBOSCOPE/TACHOMETERCONTACT AND PHOTO DIGITAL TACHOMETER
The Contact/Photo Tachometer permits checking and verifying throughput speed with or without substrate/belt contact. It incorporates photo and contact tachometer into a single measurement device. It features a large 5 digit display accurate to within 0.8% with a resolution of 0.1 RPM in either mode. Linear surface area reading also possible at 0.2 to 6560 ft/minute (15 cm to 2 km/minute). Full range of 0.5 to 100,000 RPM. The tachometer memory stores last, maximum, and minimum readings. M004-010 CONTACT/PHOTO TACHOMETER
M004-011 CONTACT/PHOTO
TACHOMETER WITH NIST
The Dual Function Tachometer provides contact and non-contact measurement of rotational and linear motions. With an accuracy of +/- .035% of indicated reading, the tachometer is ideal for uses in production, engineering, inspection, quality control and maintenance. Comes complete with a convex tip and 10 cm linear measuring wheel. A concave tip for measuring small diameter shaft, etc., is available as an option. M004-002 SPEED: TACH DUAL FUNCTION
The handheld Multi-Function Digital Tachometer with LCD delivers contact and non-contact measuring capabilities for measuring RPM, web and belt surface or linear speeds and lengths. Uses visible light beam up to 14" away from object to measure RPM. This allows you to measure the accumulated total of continuously running material (such as webs). M004-014 DIGITAL TACHOMETER01/05/2012 06:30 |
|
|
Adhesives & Epoxies - Bonding Tools - CO2 Cleaning - Thin Film & Thick Film Resistors - Electronic Packages - Dispensing Equipment - Micro Abrasive Systems - Die Bonders - Dicing Tape & Applicators - Dry Storage Cabinets - Thermal Interface Materials - UV Curing Systems & Accessories - Solderability Test Equipment - Steam Agers - Epak Custom Equipment - Custom Machine Guarding All Information and images are © copyright of Epak Electronics Ltd and our Principle Companies. No unauthorised duplication. |
PDF Data Sheet
