|
|
|
Diamond Wheel Dressing Solution Resistors - Thin Film Microwave & RF Solitec Spinners, Coaters and Developer support Storage Cabinets (Dry / Nitrogen & Custom) Tapes (Wafer, Dicing & Protective) Tape / Film Applicator / Mounters UV Curing Control & Test Equipment
Links
|
TEMPERATURE MONITORING
Temperature has a direct relationship to curing speed: the higher the temperature, the faster the cure. Yet, excessive heat may cause the substrate to distort, which can result in registration difficulties or substrate damage. Heat may also cause UV cure system components to fail. Therefore, understanding temperature is critical to ensuring proper cure and to safeguarding the substrate and system from potential failure.
DIGITAL THERMOCOUPLE THERMOMETER
This Digital Thermocouple Thermometer is an essential tool for those requiring the highest degree of accuracy and durability. It has a Total System Accuracy™ (instrument and probe accuracy combined) of +/-0.9F° (+/- 0.5C°) over the entire temperature range, -40°F to 500°F (-40°C to 260°C). Durable construction ensures reliable performance even after repetitive drops onto concrete and exposure to high temperature. Probe is made out of patented, high temperature, abrasion resistant cable, and maintains +/-0.9F° (+/-0.5C°) accuracy. Unit has an electroluminescent backlight and turns off after 5 minutes of non-use. Hold button "freezes" current reading. Factory-calibrated to NIST standards. M005-037 THERMOCOUPLE :THERMOMETER DIGITALENCASED DIGITAL PROBE TEMPERATURE GAUGE
The
Encased Digital Probe-Type Thermometer is a single-piece
device with measurement range of -40°F to 300°F (-40°C
to 150°C) for measuring temperatures in difficult to
reach areas. This rugged unit is shatter-proof to 10 ft (3
m). It is selectable between °F and °C and has a data
hold feature. Automatic shutdown after 3 minutes. Delivers
accuracy to within +/-2°F or +/-1°C. Water-resistant
with durable LCD built into the handle. M005-045 Encased Digital Probe-Type Thermometer CONDUCTIVITY AND TEMPERATURE METER HEAVY DUTY
The Heavy-Duty Conductivity and Temperature Meter has 3 measuring ranges with resolution from 0.1µS and accuracy to +/-2%, plus a dual display of conductivity and temperature measurements on its super large 1.4" (36 mm) LCD display. Conductivity ranges include 200µS, 2mS and 20mS. This unit measures temperature from 32°F to 140°F and 0°C to 60°C. It features Manual or Automatic Temperature Compensation from 0°C to 50°C adjustable from 0 to 5% per °C, fast 0.8 second sampling time, and includes an RS-232 PC serial interface. Kit contains 1K carbon cell on 39" (1 m) cable and protective holster. M005-060 CONDUCTIVITY/TEMPERATURE METERM005-061 CONDUCTIVITY/TEMPERATURE METER WITH NIST CERTIFICATION INFRARED TEMPERATURE WITH LASER POINTER
Features: M005-073 HIGH TEMPERATURE IR THERMOMETER WITH NIST HOT TEMPERATURE INDICATOR LABEL
Hot
Temperature Indicators adhere to any printed substrate
prior to curing to verify substrate temperature. The word
"HOT" appears in red at 122ºF/50ºC.
Manufactured of optically clear polyester with modified
acrylic self-adhesive. Sold 10/pack.
Features: M005-071 MINI IR THERMOMETER WITH NIST MINI INFRARED TEMPERATURE METER WITH LASER POINTER
Features: M005-075 WIDE RANGE MINI IR THERMOMETER WITH NIST SPOT CHECK SURFACE THERMOMETER - BIMETAL
The Mini Spot-Check Surface Thermometer is an affordable device for measuring substrate surface temperatures from 0-250°F (17-121°C) following product exit from the cure chamber. Its small size makes it perfect for taking measurements within confined spaces. By placing the bimetal sensor within close contact of the surface, quick temperature reading can be obtained. With a time constant (time required to reach 63% of an instantaneous temperature change) of 22 seconds, it is accurate to +/-2% of full scale range. M005-032 SPOTCHECK SURFACE THERMOMETERDIGITAL NON CONTACT THERMOMETER
The Non-Contact Digital Infrared Thermometer is a self-contained, battery-operated infrared thermometer. Ideal for reading substrate temperature as stock exits cure chamber, it has a range of 0-600°F (0°C - 315°C). Permits focused measurements from as close as 1/4" (0.6 cm) from the source. Offers distance to target ratio of 3:1. With an accuracy of +/-1% of reading plus one digit, it incorporates a passive sensor for measuring radiation within 1 second so thermal patterns and transient phenomena can be observed. Features 3-position switch on display unit for on/off, 1 second response time, and displays °F/°C. M005-009 THERMOMETER :NON-CONTACT DIGITALINFRARED NON CONTACT WITH LASER POINTER
The Infrared Thermometer is a non-contact IR thermometer with laser pointer to improve aim. This unit measures up to 600°F and is °F/°C switchable. Features a large LCD display with backlighting, narrow field of view and audible and visible overrange indicators. Fixed emissivity (0.95) covers 90% of surface applications. M005-052 IR THERMOMETER TO 600M005-053 IR THERMOMETER TO 600 WITH NIST CERTIFICATION POCKET FOLD-UP THERMOMETER WITH ADJUSTABLE PROBE
The Pocket Fold-Up Thermometer with Adjustable Probe has a 4.5" (114 mm) stainless steel probe that adjusts from 0° to 180° for storage or measurement. This unit is °F/°C switchable with data hold and min/max. It has a 1 second response time and a range of -58°F to 572°F (-50°C to 300°C). M005-058 POCKET FOLD-UP THERMOMETERPOCKET SIZED DIGITAL THERMOMETER
The Pocket-Sized Digital Thermometer is a microprocessor-based, pocket-sized thermometer ideal for any production need where quick, accurate temperature readings are required. Offers super-fast, stable and repeatable readings and factory calibrated accuracy to within +/- 1°F or C. Very user firendly with a hold function for extended readings, self-diagnostic error messaging, and auto-off. Plug-in stainless steel temperature probe allows durable access into tight areas. M005-036 POCKET DIGITAL THERMOMETERPRECISION TEMPERATURE WALL THERMOMETER
Precision Wall Thermometer allows monitoring of environmental (shop, cleanroom, ink and photo labs) temperature with this highly precise thermometer. With a range of 0°F - 150°F, and accurate to within +/-1 degree F (+/-1/2°C), this instrument features perforated sides to permit maximum ambient air flow for positive reading results. Complete with standard and critical point scale. Mount to wall or any surface not affected by extraneous temperature. M005-033 WALL THERMOMETERRAPID RESPONSE AIR THERMOMETER
The Rapid
Response Air Thermometer verifies cure chamber and
environmental temperature quickly and accurately to ensure
consistency. Response time of 5 seconds to within +/-1% of
full scale range. Simply wave the pocket-sized thermometer
in the air for immediate reading on the circular dial. PROBE-TYPE SINGLE INPUT K-TYPE
The Single Input Probe-Type Thermometer features selectable resolution for low and high temperature requirements. This highly accurate unit utilizes standard K-type thermocouple probes, temperature differential function and a single input, selectable resolution. Includes external offset calibration to ensure accuracy. Complete with probe, carrying case, and B-4 battery. M005-044 SINGLE INPUT THERMOMETERTEMPIL TEMPERATURE INDICATOR STICKS CRAYON TYPE
CON-TROL-CURE®
Tempil Indicator Sticks are ideal for working below 700°F
(371°C) on relatively rough surfaces where prolonged
heating is not required. Indicator Sticks are suitable for
determining surface temperatures during preheat, annealing
and stress relieving processes. Use them by marking the
workpiece before heating begins. The blunt-tip crayon's
dry, opaque mark will change to a distinct melted mark
when the temperature rating of the selected Temperature
Indicator Stick is reached. TEMPIL TEMPERATURE INDICATOR STICKS - KITS
The
Temperature Indicator Kit is comprised of 20 Temperature
Indicator Sticks spaced between 125°F and 800°F at 125,
150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400,
425, 450, 475, 500, 550, 600, 700, and 800°F (51, 65, 79,
93, 107, 121, 135, 149, 163, 177, 191, 204, 218, 232, 246,
260, 287, 316, 371, 427°C). DIGITAL TEMPERATURE PROBE LCD DISPLAY
Digital THERMOMETER PROBE Verifies lamp or substrate temperature with this electronic thermometer featuring LCD readout. Temperature range: -58 to 302 degree F (-50 to 150 degree C). Stainless steel probe with automatic calibration check. Large LCD display; easy to read. Exceptionally accurate. M005-031 THERMOMETER :DIGITAL PROBEEXPANDED RANGE TYPE K THERMOMETER
Shockproof, pocket-sized Expanded Range Thermometers are ideal for lab, plant, and field use. Fast response and one-switch operation make them the perfect routine thermometers. 2 models are available in either °C or °F. Range of Celsius model is -50° to +1200°C; range of Fahrenheit model is -50°F to +2000°F. Resolution: 1°. Typical accuracy is +/-1° or 1%. Supplied with 2 fast-response Type-K beaded sensors for measurements up to 250°C (482°F) continuous and 300°C (572°F) short term. For measurements up to 1200°C (2000°F), use the Type-K Triple-Purpose Accessory Probe, sold separately. M005-010 THERMO:-50 - 2000FM005-011 EXPANDED RANGE THERMOMETER -50 - 1200 DEGREES C M005-012 TYPE K HIGH TEMPERATURE PROBE
The High Temperature Infrared ProbeMeter™ is a pocket-sized IR thermometer that measures up to 1022°F (550°C). Comes with laser pointer to improve aim and audible alarm. Unit has an extra large 3-1/2 digit (reads to 1022°F / 550°C) multi-function backlit LCD with data hold, adjustable high/low set points with audible beeper alarm to alert user when temperature exceeds the programmed set points, and adjustable emissivity (0.1 to 1.00). M005-054 HI TEMP IR THERMOMETER
M005-055
HI
TEMP IR THERMOMETER WITH NIST CERTIFICATION
INFRARED HIGH TEMPERATURE WITH LASER POINTER
Features: INFRARED TEMPERATURE METER WITH LASER POINTER
The handheld Infrared Thermometer Type K Sensor performs non-contact IR measurements with a laser pointer. It features surface temperature readings with wide emissivity adjustment of 0.1 to 0.95, record/recall of both minimum/maximum readings, and is °F/°C switchable with 0.1/1° resolution. M005-050 IR Thermometer Type K M005-051 IR Thermometer Type K With NIST Certification THERMO+ANEMOMETER+HUMDIITY HAND HELD METERS
The Mini
Thermo-Anemometer Series comes in two models: the Mini
Thermo-Anemometer+Temperature and the Mini Thermo-Anemometer+Humidity. M005-079 MINI THERMO-ANEMOMETER +HUMIDITY NON-CONTACT INFRARED PROBE FOR TYPE K
Non-Contact Infrared Probe is an accurate, low-cost IR probe that can be used with all common Type K thermocouple meters. Perfect for use within confined work areas or when conditions require non-contact sensing. Calibrated at 140°F to match a K type t/c within 2% from 70°F – 190°F, and 180°F which is 2% linear from 140°F - 220°F. Available in 2 temperature levels: M005-038 measures 140°F - 220°F (60°C - 105°C) and M005-039 measures 70°F - 190°F (20°C - 90°C). M005-038 IR PROBE 140F/6OCM005-039 IR PROBE 180F/90C PAPER THERMOMETERS SELF-ADHERING
The plastic
enclosed, self-adhering Paper Thermometers are low cost,
accurate heat indicators perfect for inaccessible areas.
Heat sensitive calibrated coatings react within 1 second
of heat exposure. Distinct color change from white to
black reveals temperature level. Available in 8
temperature sets. Each set contains 16 1/2" x
2-1/2" labels, each offering 5 temperature settings.
Sets 1 and 2 have a 15 month shelf life and must be
shipped overnight in summer months. Sets 3, 4, 5, 6, 7 and
8 have a 30 month shelf life.
Pocket Thermometer With Alarm is °F/°C switchable with 0.1° resolution from -19.9 to +199.9° and 1° over 200°. It has a range of -58°F to 302°F (-50°C to 150°C). This unit features an audible alarm that alerts the user when pre-set maximum or minimum temperature is reached or exceeded. Display Hold function freezes temperature reading on display and is accurate to +/-1.8°F from -58°F to +212°F (+/-°C from -50°C to +100°C). Durable 2-1/2" stainless steel probe with 20” cable. M005-057 POCKET THERMOMETER WITH ALARMPOCKET SIZED STEM THERMOMETER PROBE
The Pocket-Sized Stem Thermometer is accurate to within +/-1% of full scale for verifying ink, coating or environmental temperatures. Actuated by a super-sensitive bimetallic helix coil. Dampened with silicone for minimum pointer vibration and maximum heat transfer. 304 stainless steel is corrosion resistant to solvents and other press room chemicals. Dial features high impact Lucite crystal and large black lettering and graduations for easy reading from any angle. M005-035 THERMOMETER: THERMOMETER STEMNON CONTACT INFRARED THERMOMETER QUICKTEMP
Quicktemp Non-Contact Infrared Thermometer safely and accurately measures infrared temperature within the cure chamber or substrate. Simply point at the desired target and press “ON” to obtain quick temperature reading in Centigrade or Fahrenheit. The total IR energy emitted into the sensor from the target area will be averaged within the field of view. With a D/T ration of 3:1, and when working 3" (7.6 cm) away from your target, the Quicktemp offers a 1" diameter working field. With a temperature range of 0-600°F (-18 to 315°C), it is accurate to +/-2% of full scale. Available with or without a laser. M005-027 IR/LASER DIGITAL THERMOMETERM005-028 IR DIGITAL THERMOMETER
The RH/Temperature Pen is a compact, digital hygro-thermometer that is ideal for field use. It features a dual LCD display for temperature, humidity, and advanced function indication. This unit has built-in temperature and humidity sensors for convenient operation and can measure temperature (°C/°F) and relative humidity simultaneously. M005-048 RH/TEMPERTATURE PENM005-049RH/TEMPERATURE PEN WITH NIST THERMAX TEMPERATURE LABELS
Temperature has a direct relationship to
curing speed: the higher the temperature the faster the cure. Yet,
excessive heat may cause the substrate to distort, which can result in
registration difficulties or substrate damage. Heat may also cause UV cure
system components to fail. Therefore, understanding temperature is
critical to ensuring proper cure and to safeguarding the substrate and
system from potential failure. M005-068 Thermax Temperature Indicator Label
18/01/2012 03:50 |
|
|
Adhesives & Epoxies - Bonding Tools - CO2 Cleaning - Thin Film & Thick Film Resistors - Electronic Packages - Dispensing Equipment - Micro Abrasive Systems - Die Bonders - Dicing Tape & Applicators - Dry Storage Cabinets - Thermal Interface Materials - UV Curing Systems & Accessories - Solderability Test Equipment - Steam Agers - Epak Custom Equipment - Custom Machine Guarding All Information and images are © copyright of Epak Electronics Ltd and our Principle Companies. No unauthorised duplication. |
PDF Data Sheet
