Bonding Capillaries, Wedges, Pick Up Tools and Dispensing Nozzles Epoxies, Adhesives, Thermoplastic Films and Thermal Gel and Greases Micro-Abrasive blasting equipment, media and systems UV Curing equipment, spares and accessories Wafer, dicing and protective tapes including UV and pressure release tapes Thin Film & Thick Film Chip Resistors, Arrays, Networks, Attenuators, MOS Chip Capacitors and Jumpers Precision Die Bonders, pick and place systems, die eject systems and wafer film mounters

Abrasives

Adhesives & Epoxies

Air Dryers

Blast Cabinets (Abrasive)

Bonding Capillaries

Bonding Wedges

Chip Capacitors

CO2 Cleaning

Custom Product Solutions

CPU Cooling (Cool-Silver)

Die Bonders

Die & Pin Eject Systems

Dicing & Wafer Tapes

Die Pickup Tools

Dispensing Systems

Diamond Wheel Dressing Solution

Dust Extraction 

Electronic Packages & Lids

Epoxy Stamping & Dispensing

Hot Gas/Rework Station

Ink Coating & Handling

Machine Guards (Custom Made)

Mask & Substrate Alignment

Maintenance & Shop Supplies

Micro Abrasive Systems

Micro Blaster Accessories

Micro Blasting Services

Pick & Place Systems

Printing Supplies &  Equipment

Resistors - Thin Film

Resistors - Thin Film Microwave & RF

Resistors - Thick Film

Safety Products

Silicon Doping Stains

Soldering Equipment

Solderability Testers

Solitec Spinners, Coaters and Developer support

Steam Aging Equipment

Storage Cabinets (Dry / Nitrogen & Custom)

Surface Abrader

Tapes (Wafer, Dicing & Protective)

Tape / Film Applicator / Mounters

UV Curing Control & Test Equipment

UV Curing Equipment

Wafer Backlap Applicator

Wire Bonding Wedges

 

 

Home Page

Applications

Contact Us 

Data Sheets

Links

Map & Directions

News

Products By Manufacturer

Site Map

Spares & Servicing

 

HAND PUMPS

By using pumps for dispensing UV Inks or coatings, you can reduce the personal handling of chemical formulations, increase productivity and provide precise metering controls to suit any job. The range of hand pumps covers not only UV and chemical for industrial applications but for all types of manufacturing and even for food grade liquids and chemicals. 


22 OZ METAL HAND PUMP

22 oz Metal Drum Pump fits 15, 30, and 55 gallon drums for all of your shop needs. This pump is self-priming and pumps 22 oz/strike. Measures 42-1/2"L x 8"W x 1-1/2"D with 2" NPS.

J004-138 22 OZ METAL DRUM PUMP


55 GALLON DRUM HAND PUMP

Upright polyethylene Plastic Siphon/Pump resists UV materials and solvents. Extended 40" siphon hose reduces splashing and allows for easy transfer of fluids. Bung mounts onto any 55 gallon drum.

J004-133 PUMPH:55G HAND PUMP

HAND GOAT THROAT DRUM PUMP

The Goat Throat™, a revolutionary new pump, is simple, safe and inexpensive. Constructed of 100% non-reactive polypropylene and engineered for maximum safety and durability, it is leak-proof to prevent potentially hazardous spills. The Goat Throat™ can handle almost any size container from 2 gallon jugs to 55 gallon drums. The pump comes with EPDM seals to resist the rigors of UV chemistry and accurately dispenses nearly every type of flowable liquid. Goat Throat™ pumps work by pressurizing a container to dispense liquids simply by opening the tap, to allow up to 5 GPM. Maximum pressure 15 PSI; operating temperature 32°-110°F.

EACH PUMP INCLUDES:
• 1 Goat Throat Pump™
• 3 drum seals ranging from 1.75"-2.25" to fit openings from 1.80"-2.75"
• 4 siphon tube segments
• 3 siphon tube connectors
• Footer for siphon tube

Goat Throat™ pump accessories are available for use with Goat Throat™ pumps in many UV applications. Remote discharge kit includes a nozzle and extension hose to greatly extend the versatility of the Goat Throat Pump™. Ideal for transfer of liquids and chemicals from large drums, the remote nozzle allows precise, one-hand flow control, leaving the other hand free for work.

Pressurized liquids can be transferred up to 20 ft above the container, previously impossible with traditional gravity-fed transfer methods. Patented drip-proof design conserves inventory, helps keep work area clean and prevent spills.

OPTIONS:
• Polypropylene Remote Discharge Tap with EPDM seal
• Remote Tap with EPDM Seal, fitted with a 5 ft or 10 ft PVC extension hose for permanent connection to the pump body
• Replacement EPDM Drum Seal Set includes 3 drum seals to fit most common container sizes
• Replacement EPDM O-ring Set includes O-rings for pressure release cap, tap assembly, piston and outlet

J004-151 GOAT THROAT PUMP
J004-152
GOAT THROAT REMOTE TAP
J004-153 GOAT THROAT REMOTE TAP 5
J004-154 GOAT THROAT REMOTE TAP 10
J004-156 GOAT THROAT DRUM SEAL SET
J004-157
GOAT THROAT O-RING SET

HIGH VISCOSITY LEVER-ACTION HAND PUMP

This die-cast alloy High Viscosity Lever-Action Pump handles UV fluids and many other heavier non-corrosive liquids up to 5,000 cPs. Fits 2" NPS (National Standard Straight Pipe Thread) bung, comes complete with telescoping suction tube, curved delivery spout and special high-angle delivery spout for filling bottles. Delivers up to 32 oz/stroke.

J004-130 HIGH VISCOSITY LEVER-ACTION PUMP

PLASTIC CHEMICAL HAND PUMP

The chemical and acid resistant Plastic Chemical Hand Pump conveniently adjusts to 2, 4, 6 or 8 oz pumping action. Fits 5 - 55 gallon drums with 3/4" or 2" NPS opening. 48"H x 9/16"D. For low to medium viscosity UV coatings, solvent and fountain solutions, water and solvent based coatings.

ALSO AVAILABLE AS SPECIAL ORDER IN THE FOLLOWING CONFIGURATIONS (prices will vary)
8 oz. max per stroke. Fits 2" Buttress
16 oz. max per stroke. Fits 2" & 3/4" NPS
16 oz. max per stroke. Fits 2" Buttress
8 oz. max per stroke. Fits FLEXSPOUT®

J004-026 PUMPH:PLASTIC CHEMICAL
J004-026FS
PLSTC CHEM PUMP FOR FS


PLASTIC SIPHON 55 GALLON HAND PUMP

Upright polyethylene Plastic Siphon/Pump resists UV materials and solvents. Extended 40" siphon hose reduces splashing and allows for easy transfer of fluids. Bung mounts onto any 55 gallon drum.


POLYETHYLENE HAND PUMP

CON-TROL-CURE® Polyethylene Hand Pump Empties 55 gallon drums to within 1/8" of bottom. Polyethylene construction provides high resistance to UV inks and coatings, inert and strong acids, alkalies and many solvents for contamination-free and long-term use. Positive pressure on downstroke provides smooth material transfer to 12 ft (3.6 m). Mounted in 2" diameter (51 mm) standard V-threaded polyethylene plug. Measures 32"L.

J004-045 POLY HAND PUMP 55 GALLON

LEVER ACTION POLYPROPYLENE HAND PUMP

This unique Polypropylene Lever-Action Pump processes up to 6 GPM, handles liquids equivalent in viscosity to SAE 90 oil. Telescoping suction tube adjusts to fit 15–55 gallon drums, fits 2” NPS bung. Self-venting spout rotates 360° for versatile dispensing. Not for use above 125°F or with heated drums. Weighs 4 lbs.

FEATURES:
• Handles viscous liquids up to 12,000 cPs
• Delivers 10 oz/stroke

J004-137 POLY LEVER-ACTION HAND PUMP

5 GALLON HAND PUMP

This 5 Gallon Hand Pump has been specifically designed for use with 5 gallon containers. It comes complete so that once assembled, it directly replaces the original container cover. The ink or coating can be pumped directly to the application equipment or into smaller containers.

J004-001 PUMP:HAND 5 GAL

5 GALLON EZ ACTION HAND PUMP FDA FOOD GRADE

The E-Z Action Hand Pump is ruggedly constructed of polypropylene and polyethylene. The E-Z Action pump does not rely on standard 'piston-pump' principles, allowing minimal friction whilst pumping, and dispensing during 'up and down' stroke.

With only 2 moving parts, the patented zero-friction design provides effortless flow of thin or thick liquids up to 8,800 cPs.

Recommended uses include acids, alkalies, oils, caustics, water, hand soap and many other liquids. Not for use with flammables or solvents.

FEATURES:
• Handle thin and thick effortlessly
• Approximately 180ml (6oz.) ouput per stroke (up/down).
• Patented zero-friction design with anti-pumping safety strap
• Made of food grade FDA materials

NOW AVAILABLE FOR THE FOLLOWING DRUM SIZES:
5 Gallon: Includes 70mm & FLEXSPOUT® adapters
15 and 30 Gallon: Includes 2" NPS & 2" Buttress adapters
55 Gallon: Includes 2" NPS & 2" Buttress adapters

J004-132 EZ-ACTION 5 GALLON PUMP

HIGH CAPACITY HAND PUMP

The High Capacity Pump is a lever action piston pump that handles oils, detergents, and other fluids compatible with polypropylene. Filtered nozzle. 36” long telescoping suction tube adjusts for 15–55 gallon drums, fits 2" NPS and 2" buttress bung. Weighs 3 lbs.

FEATURES:
• Delivers 16 oz/stroke
• No-drip spout eliminates mess and waste
• Viton® seals

J004-135 HIGH CAPACITY HAND PUMP

NICKEL PLATED HAND PUMP

The self-priming Nickel-Plated Hand Pump fits 15, 30 and 55 gallon drums with 1-1/2" or 2" openings. Nickel plating resists chemical action of non-corrosive liquids. Pumps 12 oz/stroke. Measures 41-3/8"H x 1-7/16"D.

J004-028 NICKEL-PLATED HAND PUMP

PLUNGER HAND PUMP

Self-priming plunger pump fits 15-55 gallon drums.

• Intake tube is 1-1/4" OD x 18" long; screw-on extension increases total length to 37-3/8".
• Stroke length of 17" delivers 7.5 oz. per stroke.
• Includes 2" bung adapter with set screw for height adjustment.
• Output fits standard garden hose connector; includes adapter with barb that accepts 3/4" ID tubing.

J004-017 PLUNGER HAND PUMP

POLYETHYLENE-STAINLESS HAND PUMP

This easy to operate lever-action pump delivers about 16 oz/stroke. Polyethylene body and piston with stainless steel piston rod and Teflon® impregnated packing. Curved spout rotates 360° to prevent drips, has 3/4” garden hose coupling. Weighs 5 lbs.

FEATURES:
• Handles most acids, alkalis, and other corrosives
• Fits 15–55 gallon drums with 2” NPS bung

J004-136 POLY-STAINLESS HAND PUMP

STEEL HAND PUMP

Steel Hand Pump is heavily nickel-chrome plated to prevent rust. Polyethylene piston and suction tube. Fits any drum with 2” NPS bung. Adjustable metering collar slips over handle to permit repeated strokes from 2-8 oz. Ideal for non-corrosive liquids. Weighs 5 lbs.

J004-131 Nickel Chrome Plated STEEL HAND PUMP

 

18/01/2012 03:50

EPAK
Latest  News:
 

06.07.2011

NEW Comco CTR200 Procenter Plus Workstation /Dust Extractor

Lighter, brighter, cleaner and quieter.

09.03.2011

Custom Flex Circuit Abrader

We had an unusual request for blasting the back of flex circuits to improve the laser solderability of the parts. The backing was too reflective and meant that the laser welds were not always consistent. A custom machine was built to create a uniform area over the back of the area that is soldered. This means that the area would not reflect the laser and improve the efficiency of the weld.

21.10.2010

SA150 Video of our Surface Abrader added to our YouTube channel

09.08.2010

BV9000 Videos Added  of our Rectifier Beveller to our new YouTube video channel online

03.08.2010

Comco Celebrate 45th Year Anniversary

Started in 1965 Comco Inc have been in business selling microblasters for 45 years. Epak Electronics Ltd have been Comco's UK representative since 1970 - and have built up a wealth of information and experience in micro abrasive blasting over the last 40 years.

21.07.2010

RPS ANTHEM lead dipping, twin solder bath solderability system now shipping. With dynamic solder bath or wave nozzles, single or double static or dynamic flux baths and available with optional rotary head for QFP packages. Epak have already shipped and installed the first Anthem in the UK.

   

 

09.07.2010

NEW UV-C Intensity Labels Available. Now a label is available specifically to target UV-C intensity measurement. Available now.

MORE DETAILS

09.03.2010 

Read Our Technical Article on Micro-Abrasive Applications in Micromachining in the latest Commercial Micro Manufacturing Magazine.

21.10.09 Epak Custom Large Fossil Blast Cleaning Cabinet

18.09.09 Epak BV9000 Wafer Beveller Installed

Our latest custom project to build a larger scale Wafer beveller based around the Comco BV8003 has been delivered and installed.

Designed to take from 30mm to 150mm (6") wafers. 

       27.10.08       SPT RTR-D2/D3 series  Special Pickup Tips for thin or fragile components
14.10.08 Safe-T-Stain : We are able to source all the Safe-T-Stains again in 8oz bottles. 
18.04.08 NEW from AI Technology : COOL-SILVERTM CPU Thermal Grease gives 2-3 degree centigrade lower  temperatures over the industry "standards" even for a medium performing CPS for longer life of the processors and electronic devices. 
19.03.08 : New  Website Launched

Adhesives & Epoxies - Bonding Tools - CO2 Cleaning - Thin Film & Thick Film Resistors - Electronic Packages - Dispensing Equipment - Micro Abrasive Systems - Die Bonders - Dicing Tape & Applicators - Dry Storage Cabinets - Thermal Interface Materials - UV Curing Systems & Accessories - Solderability Test Equipment - Steam Agers - Epak Custom Equipment - Custom Machine Guarding

All Information and images are © copyright of Epak Electronics Ltd and our Principle Companies. No unauthorised duplication.