DIAPHRAGM TRANSFER PUMP III transports UV/EB inks and coatings

TRANSFER III DIAPHRAGM PUMP

The CON-TROL-CURE® TRANSFER III DIAPHRAGM PUMP transports UV/EB inks and coatings at a flow rate of 0-1.8 GPM. This air-driven, double diaphragm pump economizes operation by using cubic inch air consumption rather than cubic ft. Because of its small size, the pump requires less solvent for thorough cleaning.

Offers self-priming, continuous flow without worry of electrical breakdowns or stalling. Minimal maintenance with few moving parts, high corrosion and wear resistance of wetted parts. Easy to clean stainless steel metal components.

No power is required as the pump is air driven and can use standard compressed air or bottled gas.

SPECIFICATIONS:

• Kit Includes: Air Regulator and two 6 ft lengths of UV grade tubing
• Materials of Construction: Polypropylene, EPDM, 304 stainless steel
• Operating Pressure Range: 10-60 PSI
• Overall Dimensions: 7"L x 6"W x 4"H
• Standard Fittings: 3/8" inlet and outlet stainless steel
1/4" air inlet nylon elbow fitting
• Suction lift (wet): 25" Hg/min

Item#J004-041: Includes the Transfer Pump III and the Repair Kit contains parts and instructions necessary for the replacement of the pump diaphragm. This repair kit includes 2 piston/diaphragm assemblies, valves and O-rings.

Item#J004-061: A low priced basic version of Transfer Pump III. So inexpensive, it can be used as a disposable pump! Regulator, drum/pump hanger, and hoses not included.

Item#J004-119: The CON-TROL-CURE® Transfer Pump III Repair Kit contains parts and instructions necessary for the replacement of the pump diaphragm. This repair kit includes 2 piston/diaphragm assemblies, valves and O-rings.

IMPORTANT NOTE: Check with ink or coating manufacturer to ensure compatibility between ink/coating chemistry and this pump's wet components.