Monitoring colour density of UV or EB cured product is a means of ensuring the formulation, the film thickness and the degree of cure are within specifications. A densitometer is an essential tool for producing quality printing.
The BETACOLOR S4 XPRESS COLOUR DENSITOMETER is a compact, portable Colour Reflection Densitometer that helps the pressman get to OK colour more quickly. It offers the most complete and automatic feature set available. Subtle colour changes in print appearance are automatically detected and the operator given the necessary correction in less than one second.
Frequent calibration due to deterioration of tungsten lamps and heat-sensitive filters is eliminated. The innovative, elevated, target sighting arm insures that no contact is made with the printed surface; it never touches the wet ink surface. The S4 XPress - The Easiest, Most Advanced, and Practical Densitometer on the market.
Automatic density and dot gain (3-levels)
Gray balance and trapping rotation
Pantone and Spot Colour matching.
Automatically switches modes, eliminating the need for the operator to memorize menus or button sequences.
Unique "Traffic Light" system shows the operator if they are in or out of tolerance, and the correction needed
High efficiency LED illumination eliminates the need for recharging and cumbersome adapters while providing over 1,000,000 measurements from two AA batteries.
Light Source: RGB LED's, 45/0° geometry
Aperture: 3mm standard, 2mm or 1mm optional
Range: 0.00 - 2.50D
Dot Area - 1% to 100%
Measuring Speed: 0.5 seconds, Linearity ± 1%
Target Recognition: Automatic Infrared Detection
Graphical Display: 160x80 pixels, 4 gray levels
Batteries: (2) AA alkaline >500,000 measurements
Serial Interface: USB
Dimensions: 6.9x3x1.9 inches (175x76x47mm)
Part Number - M003-001 BETACOLOR S4 XPRESS COLOUR DENSITOMETER
OTHER DENSITOMERS & SPECTRODENSITOMETERS WE OFFER: