|
Abrasives
Adhesives & Epoxies
Air
Dryers
Blast
Cabinets (Abrasive)
Bonding
Capillaries
Bonding
Wedges
Chip
Capacitors
CO2 Cleaning
Custom
Product Solutions
CPU
Cooling (Cool-Silver)
Die
Bonders
Die
& Pin Eject Systems
Dicing
& Wafer Tapes
Die
Pickup Tools
Dispensing
Systems
Diamond Wheel
Dressing Solution
Dust
Extraction
Electronic
Packages & Lids
Epoxy
Stamping & Dispensing
Hot
Gas/Rework Station
Ink Coating & Handling
Machine
Guards (Custom Made)
Mask
& Substrate Alignment
Maintenance
& Shop Supplies
Micro Abrasive Systems
Micro
Blaster Accessories
Micro
Blasting Services Pick
& Place Systems
Printing
Supplies & Equipment
Resistors
- Thin Film
Resistors
- Thin Film Microwave & RF
Resistors
- Thick Film
Safety Products
Silicon Doping Stains
Soldering Equipment
Solderability
Testers
Solitec
Spinners, Coaters and Developer support
Steam
Aging Equipment
Storage Cabinets (Dry / Nitrogen & Custom)
Surface
Abrader Tapes
(Wafer, Dicing & Protective)
Tape
/ Film Applicator / Mounters
UV Curing
Control & Test Equipment
UV Curing Equipment
Wafer Backlap
Applicator Wire
Bonding Wedges
Home
Page
Applications
Contact
Us
Data
Sheets
Links
Map
& Directions
News
Products
By Manufacturer
Site
Map
Spares
& Servicing
|
COLOUR DENSITOMETERS
   
Densitometers are used for measuring the degree of darkness or colour
saturation. They are used for making adjustments for printer calibration so
outputs are consistent with the colors desired in the finished products.
Densitometer comparison chart
BETACOLOR
2000 COLOUR DENSITOMETER
A
revolutionary spectro-densitometer for color matching,
proofing, and pressroom applications, the Betacolor 2000
features; Multi-line, multi-lingual display of Lab, LCH,
Xyy, Delta E, 7 color Hi-Fi density, dot gain, trap, etc.
Status T densitometry and much more!
Densitometer Functions:
Lab, LCH, Xyy, Delta E and components
Automatic Zero Calibration
Automatic 7 Color Recognition
(C,M,Y,K, + Orange, Blue, Green)
Density and Density Difference
Gray Balance and Color Balance
Automatic Dot Area
(Murray/Davies)
Auto Dot Gain at 3 levels
Automatic Trapping
(1st, 2nd, 3rd color sequence recognition)
Hue Error, Grayness
Print Contrast
Absolute Zero
Density Slope Control
Technical Specifications:
Multi-Language Digital LCD Display:
4.75mm high, 4 lines, 16 characters
Density range: 0.00 - 2.50
Density Repeatability: +/- 0.003
Percent Dot Area: 0 - 100%
Aperture: 3.3mm (1.8mm optional)
Measuring Time: 0.4 sec.
Linearity: +/- 1%
Filters: StatusT, Statusl, (DIN16536)
Polarization: optional for density
Light Source: multi LED
Measurements/ battery set: 300,000+
Power Source: 4 X 1.5v AA Alkaline Batteries
Detector: Photodiode
Weight: 14 oz. (390 grams)
Dimensions: 5.75 x 3.3 x 1.9 in (145x83x48mm)
Serial Interface: RS232
M003-006 BETACOLOR
2000
BETACOLOR
S2 COLOUR DENSITOMETER
The S2 is a
full featured, economically priced, color reflection
densitometer for the busy pressroom. Perfect for the
2-color press running process color work, simultaneously
measures the most important variables; solid density and
dot gain, without touching a button. Get the convenience
of auto zero, auto color selection, and auto function
selection for quick and sure operation.
M003-005 BETACOLOR
S2
BETACOLOR
S1 COLOR DENSITOMETER
Reflection
densitometer that is ideal for the single color press, the
“value-priced” S1 measures density on both proofs and
press sheets. A few key features include: auto density,
auto zero, auto color recognition with manual override,
manual gray balance, slope control, LED illumination, and
RS 232 serial output.
M003-004 BETACOLOR
S1
Betacolor S1 Operating Instructions
BETACOLOR
S4 XPRESS COLOUR DENSITOMETER
Monitoring color density of UV
or EB cured product is a means of ensuring the formulation, the film
thickness and the degree of cure are within specifications. A densitometer is
an essential tool for producing quality printing.
The BETACOLOR S4 XPRESS COLOR DENSITOMETER is a compact, portable
Color Reflection Densitometer that helps the pressman get to OK color more
quickly. It offers the most complete and automatic feature set available.
Subtle color changes in print appearance are automatically detected and the
operator given the necessary correction in less than one second.
Frequent calibration due to deterioration of tungsten lamps and
heat-sensitive filters is eliminated. The innovative, elevated, target
sighting arm insures that no contact is made with the printed surface; it
never touches the wet ink surface. The S4 XPress - The Easiest, Most
Advanced, and Practical Densitometer on the market.
FEATURES:
Automatic density and dot gain (3-levels)
Gray balance and trapping rotation
Pantone and Spot Color matching.
Automatically switches modes, eliminating the need for the operator to
memorize menus or button sequences.
Unique "Traffic Light" system shows the operator if they are in or
out of tolerance, and the correction needed
High efficiency LED illumination eliminates the need for recharging and
cumbersome adapters while providing over 1,000,000 measurements from two AA
batteries.
SPECIFICATIONS:
Light Source:
RGB LED's, 45/0° geometry
Aperture:
3mm standard
2mm or 1mm optional
Range:
0.00 - 2.50D
Dot Area - 1% to 100%
Measuring Speed:
0.5 seconds, Linearity ± 1%
Target Recognition:
Automatic Infrared Detection
Graphical Display:
160x80 pixels, 4 gray levels
Batteries:
(2) AA alkaline
>500,000 measurements
Serial Interface:
USB
Polarization:
Optional
Dimensions:
6.9x3x1.9 inches
(175x76x47mm)
M003-001 Betacolor S4 Xpress
color densitometer
Datasheet for M003-001 Betacolor S4 Xpress Colour Densitometer
BETACOLOR
S7 XPRESS COLOR DENSITOMETER
Monitoring color density of UV
or EB cured product is a means of ensuring the formulation, the film
thickness and the degree of cure are within specifications. A densitometer is
an essential tool for producing quality printing.
Our new spectro-densitometer, the BETACOLOR S7 XPRESS COLOR DENSITOMETER
offers these features:
7 Color Density and Dot Gain
Lab, Delta E, and color tolerancing
Zero-Maintenance design
Contact us or your local dealer to arrange a Free Ten Day Trial in your shop.
The newest member of the Betacolor Xpress series brings extraordinary
ease-of-use and productivity to the production floor and the QC office. The
Betacolor S7 Spectro Xpress Spectro Densitometer features the same highly
intuitive user interface as the Betacolor S4 Xpress, leading to easy
adoption, wide acceptance, and quick payback on your investment.
Highly understandable densitometer functions including density, dot gain,
trapping efficiency, and gray balance help the press operator quickly achieve
specified color. The process color gamut is expanded to measure red, green,
and blue density and dot gain as well. The unique "traffic light"
system quickly gives the press operator the OK when he is running in spec and
detailed guidance when the color exceeds the customer's limits.
Today's emphasis on Near Neutral Gray Balance is implemented with the most
user-friendly and automatic system on the Betacolor S7 Spectro Xpress. GRACoL
and the G7 Methodology are highly productive if the operator can make sense
of the instrument and the data. Gray balance targets are automatically
recognized, measurements taken, tolerances calculated, and the operator given
the the exact information he needs in less than a second.
Beta's newest Spectro-Densitometer is easy to use and at a price every
manager can appreciate. Perfect for Gracol and G7 methodolgy.
FEATURES:
An Automatic 7-Color Instrument with Gray Balance
Advanced LED Technology for 1,000,000 measurements on two AA batteries
Perfect for Pantone color matching and Gracol G7
Includes all the automatic features of the betacolor S4 Xpress
Auto Color Density
3 Dot Gain levels
Gray Balance
Trapping and Color Rotation
"Traffic Light" Indicator for every function
delta E color difference
L*a*b*
L*C* h
7 Color channels for CMYK and Red, Green, and Blue
User selectable polarization and Status E, I, T
M003-015 S7 Spectro Express Spectro densitometer
Datasheet for M003-015 S7 Spectro Xpress spectro densitometer
18/01/2012 03:50
|
|
