CONVEYOR BELTS
We offer a range of conveyor belts from the
Heat Dissipating UV Conveyor Belts are specially
designed to withstand high levels of radiation emitted from a UV curing
system, to Standard Conveyor Belts that can withstand UV light, ozone and
solvents, and provide long life at exposure to processing temperatures from
-40 to 500 degrees F.
HEAT
DISSIPATING CONVEYOR BELT
The
CON-TROL-CURE® Heat Dissipating UV Conveyor Belts are
specially designed to withstand high levels of radiation
emitted from a UV curing system. Special PTFE coating over
the fiberglass mesh contains carbon black to dissipate
heat very rapidly. Suitable for smaller UV curing systems
which provide limited belt cooling time. PTFE coating also
provides higher resistance to solvents, harsh detergents,
acids, alkalies and corrosive chemicals. Available with
Teflon® sewn-and-sealed edges, and stitched with Kevlar®
threads. Custom-sized to your specifications. 1/4"
open mesh. Choice of splice: Alligator®, Clipper®, or
Soft Seal®.
SPECIFICATIONS:
• Working Tension: 50 lbs/inch of width
• Pulley Diameters: As small as 1"
• Edge Reinforcement: 2 rows of 1" fiberglass, sewn
and sealed
to prevent unraveling
• Chamber: Allowed 1"/100' or less
• Widths: Up to 72" (Wider belts- special order)
FILL OUT THE CONVEYOR
BELT FORM OR
CALL FOR MORE INFORMATION ABOUT HEAT DISSIPATING UV
CONVEYOR BELTS FOR YOUR SPECIFIC APPLICATION.
B002-002
CONBLT:CONV
BELT UV BL
B002-003
SLCN
BLT:.39WX63LX.020
B002-006
TEFKV:14W136.6LALGTFLP
STANDARD
CONVEYOR BELT
The
CON-TROL-CURE® Standard Conveyor Belt can withstand UV
light, ozone and solvents, and provide long life at
exposure to processing temperatures from -40 to 500
degrees F. Our open mesh fiberglass belts are impregnated
and coated with Teflon®. Alligator® splice and Teflon®
sewn-and-sealed edge reinforcement are standard in all
CON-TROL-CURE® Conveyor Belts. Alligator® splicing
provides better tracking for riding around pulleys and
rollers, especially those with small diameters. Clipper®
and Soft Seal® splicing are also available.
SPECIFICATIONS:
• Working Tension: 50 lbs/inch of width
• Pulley Diameters: As small as 1"
• Edge Reinforcement: Two rows of 1" fiberglass,
sewn and sealed to prevent unraveling
• Chamber: Allowed" 1"/100' or less
• Widths: Up to 72" (Wider belts available by
special order)
FILL OUT THE CONVEYOR
BELT FORM OR
CALL FOR MORE INFORMATION ABOUT STANDARD CONVEYOR BELTS
FOR YOUR SPECIFIC APPLICATION
B002-001 CONBLT:CONV
BELT STD
|
