SMALL AREA CURING EQUIPMENT
     
  
UV spot curing offers
instantaneous cure of photoinitiated adhesives, potting
compounds, UV coatings and inks. Applications that require
a highly concentrated UV curing include PC board
applications, encapsulation, wire tacking and high
strength bonding of disparate materials.
BONDWAND
350 NM UV CURE LAMP
The unique
Bond Wand 350nm UV light source provides controlled energy
with a peak wavelength of 365nm, ideal for curing most
UV-activated materials. Versatile 9W lamp emits the
highest UV intensity of any comparable lamp.
Sturdy and lightweight, the Bond Wand features a contoured
housing for perfect balance. Integrated UV protective
shields provide unobstructed viewing. Built-in variable
exposure timer of 1, 2 and 3 minute intervals as well as
continuous, makes the Bond Wand ideal for lab, production
or research use.
SPECIFICATIONS:
Input Voltage: 120V AC, 50/60Hz
Input Power: 12W
Output Power: 10mW/cm2 at 350nm (minimum)
Area of Exposure: 5" x 1-3/4" (12.71 cm x
4.45 cm)
Dimensions: 2-1/2"W x 12-7/8"L x
1-5/8"D (6.4 cm x 32.7 cm x 4.12 cm)
Weight: 1 lb, 8 oz (680 g)
Timer: Solid-state, 1, 2 and 3 minutes, or continuous
Line Cord: 3-wire, 76" length (193 cm)
A012-021 BONDWAND
350NM
A012-021F UV
LIGHT:BONDWND 230V
HANDHELD
SYSTEM SPOT CURE
The Handheld
Spotcure System is a rugged high energy spot-cure system
that generates a minimum output of 70mW/cmฒ at 365nm.
Employing a broad range of interchangeable light guides
and a solid state variable timer with audible indicator as
well as timer settings of 20, 30, 40, 50 and 60 seconds.
Internal voltage regulation and an efficient cooling
system assures years of trouble-free operation. Continuous
operation capabilities make this system ideal in
controlled production environments. Also available in a
visible light version, which generates greater than
700mW/cmฒ of visible light output at 450nm wavelength.
Perfect for small applications and formulations that
require a visible light source.Power Input : 100/120V 60
Hz, (220V/240V, 50/60 Hz Optional) Please specify at time
of order.
A121-026F SPOT:
GUN DELUXE 220V
A121-035
SPOT:HANDHELD
SPOTCURE
PENLAMPS
UV LAMPS
Low pressure
UV Penlamps are cold cathode, mercury, gaseous discharge
lamps constructed of double bore quartz. Specially
designed with electrodes at one end for insertion into
small apertures. UV Penlamps are known for their long life
(5000 hours), stability throughout the lamp life and high
degree of isolated spectral line accuracy. They can be
used as primary references or spectral sources. The range
of applications include monochromatic sources for optical
systems and reference studies. Other applications include
chromotography, interferometry and atomic absorption
techniques.
Part Number Description
A129-001 UV PENLAMP 254nm/ 2-1/8"
Lighted Length: 2-1/8" (5.38 cm) Tube O.D.: 1/4"
(.64 cm)
Total Length: 4-5/8" (11.75 cm) Plastic Handle O.D.:
3/8" (.95 cm)
A129-004 UV PENLAMP 254nm/ 1"
Lighted Length: 1" (2.54 cm) Tube O.D.: 5/32"
(.40 cm)
Total Length: 2-3/8" (6.03 cm) Plastic Handle O.D.:
1/4" (.64 cm)
A129-003 UV PENLAMP 254nm/ 3/4"
Lighted Length: 3/4" (1.91 cm) Tube O.D.: 1/4"
(.64 cm)
Total Length: 3-1/4" (8.26 cm) Plastic Handle O.D.:
3/8" (.95 cm)
A129-002 UV PENLAMP 365nm/ 2-1/4"
Lighted Length: 2-1/4" (5.72 cm) Tube O.D.: 3/8"
(.95 cm)
Total Length: 4-3/4" (12.07 cm) Plastic Handle O.D.:
3/8" (.95 cm)
A129-005 UV PENLAMP 365nm/ 1-1/8"
Lighted Length: 1-1/8" (2.86 cm) Tube O.D.: 1/4"
(.64 cm)
Total Length: 2-5/8" (6.03 cm) Plastic Handle O.D.:
1/4" (.64 cm)
UV PENLAMP POWER SUPPLY
Designed specifically for UV Penlamps and similar lamps.
This UV Penlamp power supply provides proper voltage for
start-up and operation.
SPECIFICATIONS:
Lamp Current: 18mA (average)
Dimensions: 5-1/2"L x 2-1/4"H x 3"W
Maximum Primary Current: 400mA
Primary Cord: 8' (248 cm), 3-wire
Operating Voltage: 115V/60 Hz
Secondary Cord: 3' (91.4 cm)
| A129-001 |
PENLAMP:254NM 2-1/8 |
| A129-002 |
PENLAMP:365NM 2-1/4 |
| A129-003 |
PENLAMP:254NM 3/4 |
| A129-004 |
PENLAMP:254NM 1IN |
| A129-005 |
PENLAMP:365NM 1-1/8 |
| A129-006 |
PENLAMP:POWER SUPLY |
| A129-007 |
POWER SUPPLY 1800V AC FOR A129-004 AND A129-005 |
| A129-008 |
PENLAMP:SHIELD |
SPLICING
LAMP 352nm UV LAMP
Optical fiber
Splicing Lamp reduces splice time through long-wave UV
energy. Delivers superior performance and a reliable
splice. Perfect for datacom telecom, medical and numerous
military applications. AC/DC capability, delivers up to
6mW/cm2 output at 352nm.
A012-020 UV
LIGHT:SPLICING LAMP
UV
SPARE PARTS
Spare parts for small area curing equipment.
A121-003
SPOT:REPLACEMENT
PROBE
A121-009 SPOT:REPLACEMENT
LAMP
A129-010RETAINER:SENSOR
CURESPOT
CURE LAMP
Considered the
industrys economical work-horse, high efficiency is the
hallmark of the CURE SPOT 50 UV spot light. CURE
SPOT 50 maximizes UV output and minimizes IR for quick,
excellent surface curing, while reducing the risk of
component overheating. It can be used in manual
applications or mounted for automated processes. The
perfect unit for medical disposable devices, electronic
assembly and other industrial spot curing applications.
BENEFITS:
Digital shutter timer can be activated manually by
footswitch or by PLC for greater process flexibility.
Pre-focused lamp reflector insures maximum output
every lamp change. Can be changed in approximately one
minute.
Low maintenance and 4,000 hour bulb life results in
minimal downtime and higher throughput.
Thermally controlled, dual fan cooling/filtering
system insures proper lamp temperature and keeps dust out
of unit.
Proprietary dichroic reflector coating, in combination
with additional optical filter, provides maximum UV output
with
minimum heat for greater flexibility in processing and
reduced risk of damaging adhesives or parts.
FEATURES:
Pre-focused, high quality, 100% tested bulb
2,000 hour bulb warranty; up to 4,000 hour life
expectancy
Isolated lamp chamber for temperature control &
intensity lifetime options
Visual lamp indicator
Lightguide locking mechanism
Durable, cleanroom ready
Digital LCD timer
SPECIFICATIONS:
UV Output: 3000+mW/cm2 at 365nm
Power Requirements: 115V, 60Hz/ 230V, 50Hz
Power Supply: 50W linear
Lamp: 50W short arc Mercury pre-focused in
reflector
Reflector: Ellipitical glass dichroic coating to
reflect
UV, eliminates IR
Shutter Timer: Digital LCD, standard single-shot count
down; other timer programs are available
Shutter Activation: Remote foot switch or
user-supplied switch
Cooling: Filtered, dual-fan arrangement, thermally
controlled to maintain proper lamp
temperature
Hour Meter: Digital LCD
Housing Dimensions: 12.0" x 11.5" x
6.5" (30.56 cm x 29.2 cm x
16.5 cm)
Weight: 21 lbs (9.5 kg)
NOTE: Unit not sold with liquid light guide. For a list of
available light guides, see below
A121-031
SPOT:CURE
SPOT 50 115V
A121-031B
SPOT:CURE
SPOT 50/230V
LIQUID
LIGHT GUIDES
Whether you
want to cure UV adhesives, do florescence studies with UV
light, or simply have the brightest, whitest source of
cold light available... CON-TROL-CURE can provide a Liquid
core Lightguide to do the job.
The new CON-TROL-CURE TM Liquid Lightguides transmit UV
light down to a wavelength of 250nm, and with short guide
lengths even down to 220nm. As a result, applications
requiring UVC now also benefit from the advantages of
Liquid Lightguides. Important applications are wafer
manufacturing, analytical measurements, fluorescence,
epoxy curing where UVC eliminates the surface smear film,
and photo therapy. Additionally, critical applications
with high power UV lasers (i.e. 308nm excimer laser) are
now possible with excellent transmission stability.
Conventional light guides are comprised of quartz fiber
bundles. The core of each individual fiber consists of
pure quartz glass and the cladding is doped quartz glass.
The most important advantages of CON-TROL-CURE TM Liquid
Lightguides over conventional quartz fiber bundles are:
Between 230 - 400nm the transmission of CON-TROL-CURE TM
Liquid Lightguides is significantly higher. (Transmission
of up to 80% in 2 meter length)
The theoretical maximum angle of aperture 2a is 72ฐ and
only 29ฐ for quartz/quartz fiber bundles. Thus
CON-TROL-CURE TM Liquid Lightguides can transmit more
power from conventional, non coherent UV sources.
The costs for CON-TROL-CURE TM Liquid Lightguides are only
a fraction of those for quartz fiber bundles.
The long term operational temperature range of
CON-TROL-CURE TM Liquid Lightguides is -10ฐC to +40ฐC.
When adapted to a light source, the light entrance sleeve
of the light guide should not reach a temperature above
50ฐC.
CON-TROL-CURE
TM Liquid Lightguides are available in a variety of end
fittings and in lengths of up to 5m. Special fittings can
be made to customer specifications.
Features:
Delivers better UV transmission than quartz fiber
guides
Competitive pricing makes liquid light guides a very
cost-effective replacement/upgrade option
Cooler light than glass fiber guides; visible guides
transmit minimal IR
Robust mechanical design eliminates problems
associated with fiber breakage (dim, patch light)
Liquid light core eliminates packing losses and
provides totally uniform transmission with high Numerical
Aperture (NA).
A121-040
SPOT:LIQ
LIGHT GUIDES
POWERARC
UV100
The PowerArc
UV100 is the perfect unit for rapid, controlled UV curing.
This low cost, yet powerful unit minimizes IR and
maximizes UV output for quick curing and low risk of
component overheating. It can be used in manual
applications or mounted for automated processes. The
adjustable lamp intensity peaks at a powerful 7W/cmฒ at
365nm.
Features:
Compact, reliable, and easy movement
Easy operation-- precision control
Durable construction
Low maintenance, long lamp life results in minimal
downtime, higher throughput.
Time saver (rapid cure)
Money saver (cost efficiency)
Fast and easy lamp replacement
Microprocessor control with LCD display allows for
flexible programming
Working hours UV lamp counter
Specifications:
Lamp: 100W mercury short arc lamp
Lamp life: 1000 hours warranteed
Peak Intensity: 7W/cmฒ @365nm (peak)
Output: 10W/cmฒ (250nm-500nm)
Light delivery: F5mm x 1M toxic-free liquid light
guide(single)
Warm up: 2 minutes
Dimentions: 16cm H x 33cm W x 27cm D
Weight: 20.9lbs (9.5kg)
Power Supply: 110V & 230V, 50/60 Hz system with
auto voltage change function
Options: Single or dual 5mm/3mm liquid light guides
A121-032
SPOT:POWERARC
UV100
UV
GUN DELUXE SPOT CURE
The CON-TROL-CUREฎ UV Spot
Gun Deluxe is designed for small area curing and small
part applications of UV or visible adhesives within the
365-500nm range. The unit will not overheat, even with
continuous exposing cycles. This highly versatile system
can be handheld, mounted on a table or wall.
This reliable, compact curing unit is perfect for
spot/larger area (10 cm x 10 cm) curing. The precision
optics offer exceptional depth of cure. It generates a
high intensity UV output of 70mW/cm2 and the UV peak is at
365nm. After depressing the switch, the cycle time begins
and the beeper sounds every 10 seconds.
One squeeze of the trigger starts the cycle time. After
the designated exposure time has been reached, an audible
alarm sounds as the light shuts off. The digital timer can
be set to cure from 10 seconds to 9 minutes in 30 second
intervals. There is a trigger activated cycle interrupt
that stops exposure when the full preset cycle is not
required. The unit has a quiet, high CFM cooling fan,
which starts when the lamp is activated and stops
automatically 3 minutes after final exposure.
The UV Spot Gun Deluxe is equipped with a 8 mm x 60ฐ
light guide and an extended life (100+ hours) lamp.
Optional extra light guides are available by special order
and can be purchased separately: 3 mm x 90ฐ, 13 mm x
80ฐ, or 13 mm straight. Carries the CE mark.
FEATURES:
UV/VIS Output: Faster cure over a wider spectral range
Long Lamp Life: 100 hours of curing power
Programable Timer: Convenient 30 second presets, from
10 seconds to 9 minutes
SPECIFICATIONS:
Power Input: 90W (maximum wattage)
Lamp Rating: 12V AC, 75W
Lamp Life: 100 hours (typical)
Light Guides: 8 mm x 60ฐ (standard)
3 mm x 90ฐ
13 mm x 80ฐ
13 mm straight
Operating Voltage: 110V, or 230V +-10% 50/60HZ
Intensity Output: 70mW/cm2 @365nm 100mW/cm2
(300-400nm)
Dimensions: Power Unit Curing Gun
(no fixture) (no optic probe)
Height: 7.1 cm 15 cm
Width: 13.5 cm 5.8 cm
Depth: 18.5 cm 11.7 cm
Weight: 1750 g 380 g
Includes: Lamp, probe, eye protection shield, manual
NOTE: PLEASE SPECIFY REQUIRED VOLTAGE AT TIME OF ORDER. IF
NOT SPECIFIED, INSTRUMENT WILL SHIP AS 110V 60Hz ONLY.
| A121-026 |
SPOT GUN DELUXE |
| A121-026LMP |
UV LAMP:A121-026 |
| A121-027 |
13 MM STRAIGHT LIGHT GUIDE |
| A121-028 |
SPOT:13MM X 80 DEGREE |
| A121-029 |
SPOT:8MM X 60 DEGREE |
| A121-030 |
SPOT:3MM X 90 DEGREE |
| A121-033 |
LAMP:SPOT GUN DELUX |
UV
SYSTEM 5000 mW
5,000mW/cm2 of
initial ouput delivers a peak intensity of 365nm and the
maximum energy for spot curing UV adhesives, inks or
coatings. 5mm x 1m liquid filled light guide incorporates
a dichroic reflector to reduce IR build-up. Vertical bulb
orientation produces maximum output and extended bulb
life. No tools are required to open lamp reflector
assembly for reduced downtime. Digital shutter timer with
foot switch permits hands-free operation.
While lamp intensity of this system starts in excess of
5000mW/cm2, over the life of the lamp this intensity
degrades to 40% of initial output after about 1000 lamp
hours. This is a standard characteristic of all arc lamps.
Since most UV chemistries need less than 1000mW/cm2 of UV
to initiate proper photoinitiator reaction, the 2000mW/cm2
of power towards the end of the lamp life is more than
twice that needed to provide proper UV cure.
Solid-state power supply includes bulb life hour meter,
and temperature controlled dual cooling fan system.
Compact, anodized enclosure has a footprint of only
9.75" x 12.5". Total weight: 12 lbs.
A121-014
UV
SPOTCURE 5000MW
A121-036
UV
LAMP:SPOT 5000MW
A121-037
UVLAMP:SPOT
5000MW OLD
|
