The US/UT design incorporates all the latest technical features in semiconductor wire bonding tool designs and is widely used by every bonder manufacturer in the world. The 60º heel with the more squared back or radius area normally will produce a short tail. This tool style is most commonly used where fine pitch bonding is not required. Suitable for Gold or Aluminium wire bonding.
The US Series tools have a 0° back angle and the UT Series tools have a 10° back angle (BA - see tool image above)
Available in 30°C, 38°C and 45°C wire feed angles
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - UT Wedge (Standard)
Part Number - US Wedge (Standard)
Part Number - VU - Vertical Hole Shank UT/US Wedge
Part Number - JU - Special Clearance For Vertical Hole Shank UT/US Wedge
Part Number - HU - Double Flat Shank UT/US Wedge
Part Number - PU - Double Flat Shank - Enhanced Transducer UT/US Wedge
Part Number - UT-180-DEG-REV -180 Degree Reversed Shank WedgeUT/US Universal Bonding Wedge DatasheetSPT Wedge Shank Styles Datasheet
BONDING WEDGES & TOOLS WE OFFER:
FP FINE PITCH SERIES WEDGE
UT UNIVERSAL BONDING WEDGE
COB CHIP ON BOARD WEDGES
ABT AUTOBONDING TOOL WEDGES
SLIMLINE NOTCH BONDING WEDGES
MICROWAVE BONDING TOOLS
RIBBON WIRE BONDING WEDGES
DOUBLE X GROOVE SINGLE POINT-TAB TOOL (7000/7100)
DOUBLE X GROOVE SINGLE POINT-TAB TOOL (7500/7600)
WAFFLE FOOT TAB BONDING WEDGE (7045/7145)
SIDE WIRE BONDING WEDGE (1008A)
INSULATED WIRE BONDING WEDGE (XGR)
THERMOCOMPRESSION BONDER NEEDLES (PF)
LARGE WIRE NO-HOLE INLINE U-GROOVE (CK)
LARGE WIRE NO-HOLE INLINE V-GROOVE (CKVD)
LARGE WIRE NO-HOLE INLINE V-GROOVE (LWD6)
ORTHODYNE STYLE INLINE V-GROOVE (OSG7)
BACK BONDING WEDGE (1001/1002/1110)
LARGE WIRE 45° FEED HOLE INLINE V-GROOVE (45CK)
INLINE GROOVE AUTOBONDING TOOL (AB16)
INLINE GROOVE NOTCH TOOL (3016/4516)
HOLE INLINE V-GROOVE (30D6/45D6/60D6)
INLINE U/V-GROOVE (1015A/2015A/1016A/2016A)
MICROLOY OSMIUM-CARBIDE ALLOY
BONDING CAPILLARIES FROM SPT
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - UT Wedge (Standard)
Part Number - US Wedge (Standard)
UT/US Universal Bonding Wedge Datasheet
FP FINE PITCH SERIES WEDGE
UT UNIVERSAL BONDING WEDGE
ABT AUTOBONDING TOOL WEDGES
MICROWAVE BONDING TOOLS
RIBBON WIRE BONDING WEDGES
DOUBLE X GROOVE SINGLE POINT-TAB TOOL (7000/7100)
DOUBLE X GROOVE SINGLE POINT-TAB TOOL (7500/7600)
WAFFLE FOOT TAB BONDING WEDGE (7045/7145)
SIDE WIRE BONDING WEDGE (1008A)
INSULATED WIRE BONDING WEDGE (XGR)
THERMOCOMPRESSION BONDER NEEDLES (PF)
LARGE WIRE NO-HOLE INLINE U-GROOVE (CK)
LARGE WIRE NO-HOLE INLINE V-GROOVE (CKVD)
LARGE WIRE NO-HOLE INLINE V-GROOVE (LWD6)
ORTHODYNE STYLE INLINE V-GROOVE (OSG7)
BACK BONDING WEDGE (1001/1002/1110)
LARGE WIRE 45° FEED HOLE INLINE V-GROOVE (45CK)
INLINE GROOVE AUTOBONDING TOOL (AB16)
INLINE GROOVE NOTCH TOOL (3016/4516)
HOLE INLINE V-GROOVE (30D6/45D6/60D6)
INLINE U/V-GROOVE (1015A/2015A/1016A/2016A)
MICROLOY OSMIUM-CARBIDE ALLOY
BONDING CAPILLARIES FROM SPT
