Phone: +44 (0)1460 61791
Email: sales@epakelectronics.com

UV Curing Equipment

We offer a wide range of UV Curing equipment for all your needs including curing chambers, radiometers, reflectors, replacement lamps, small area spot cure systems, UV safety equipment and everything you may need to maintain your UV equipment.

UV CURING EQUIPMENT:

UV Measurement
UV LED Lamps
UV Cure Chambers
UV Filters and Glasses
Ozone Detection
UV Exposure System
Reflectors
UV Spot Cure Lamps
Curing Equipment Spares
UV Lamps
Lamp Maintenance

UV Cure Chambers

Low intensity bench top UV cure chamber capable of using 254nm, 302nm and 365nm lamps. Programmable UV energy exposure or time settings. Interior Chamber Dimensions: Height: 15cm, Depth: 35cm, Width: 27cm.
Weight: 6.8kg (15 lbs)

NOTE: THIS LOW INTENSITY CURING CHAMBER IS NOT RECOMMENDED FOR CURING PIGMENTED INKS.

UV Cure Chambers

UV Spot Cure Gun

Spot Gun Deluxe Cure Lamp. The CON-TROL-CUREĀ® UV SPOT GUN DELUXE is designed for small area curing and small part applications of UV or visible adhesives within the 365-500nm range. The unit will not overheat, even with continuous exposing cycles. This highly versatile system can be handheld, mounted on a table or wall.

UV Spot Cure Lamps

UV Measurement Radiometer and Labels

UV Measurement Radiometers and labels to check UV lamp outputs and verify UV exposure. We haev a range of different solutions depending on your application. Anything from our easy to use UV intensity labels to a profiling radiometer to check your entire UV curing process.

UV Measurement

UV Filters and Safety Glasses

We have several types of filter sleeves, sheets and rolls of UV films available including rigid acrylic sheets, flexible films and rolls with either adhesive or non-adhesive backings, screens, and tube suitable for a wide range of florescent tubes, PL style lamps and also have a range of light reduction filters that can be used in combination with UV filters.

UV Filters and Glasses

UV Exposure Systems

Available from ABM Inc in the USA is their UV Exposure System. The stand alone UV exposure system is capable of near UV (350-450nm), mid UV (280-310nm) and deep UV (220-280nm).

Mirror Sets available are: Near UV, G, H, & I line (436nm, 400nm, 365nm), Mid UV (280-310nm), Deep UV (220nm), (248nm), (254nm), (260-280nm)
Uniform/Collimated Exposure Beams Up to 16" Square
Uniform/Non-Collimated Exposure Beams Up to 18" Square
2-Channel 200 to 2,000 Watt Intensity Controlling Power Supplies
Adjustable Wattage (regulated) 200 to 2,000 Watt Power Supplies
Exposure Timer, Adjustable .1 To 999.9 Seconds, Minute Timers Available

UV Exposure System

UV Spares and Replacement Parts

We offer many spare parts for UV curing systems including power supplies, lamp holders, reflectors, mirrors, mercury relays and many other useful parts to repair, refurbish and keep your uv system operating in an efficient way.

Curing Equipment Spares

Replacement UV Lamps and Bulbs

We can source many different spare UV lamps for all kinds of systems. Please see our page for the different types available.

Ozone Detection

Replacement UV Reflectors

Replacement UV reflector material. This affordable reflector material can be cut to size and attached to your reflector housing. The highly polished aluminum sheet is 24" x 48" and 0.020" thick. The ability to install or replace your existing reflectors quickly and inexpensively ensures that your curing unit is always functioning at peak efficiency. Price breaks for multiple sheet order.

Replacement reflectors for Lighthouse Curing Systems from the same high quality material are available for Shuttered, Non-Shuttered, their accompanying end pieces, and V-Shaped Reflectors. Sold by the inch.

Reflectors

Ozone Gas Detection

Electronic ozone gas detection alarm, wearable idicator badges, and UV curing indicator test strips.

Ozone Detection