Phone: +44 (0)1460 61791 Email: sales@epakelectronics.com
Reusable CON-TROL-CURE® T5, T8, and T12 UV FILTER TUBES encase existing fluorescent lamps and filter UV radiation up to 395nm when used with 400 M.A. lamps. Insulate and improve lighting efficiency at low temperatures. High tensile polycarbonate protects people and equipment from lamp shattering. Furnished with end caps that fit snugly between lamp and sleeve. Release channel allows gases to disperse slowly into the atmosphere. Perfect for laboratories, museums, galleries and other areas where UV light can deteriorate materials. Available with T8, or T12 diameters in 4' lengths of clear, red, or amber and the end caps are included. Also now available with T5 diameter in 4' lengths of clear or amber with end caps.
T8 bulbs have a diameter of 1", T12 bulbs are 1½". Clear T8 and T12 tubes are also available in 8' lengths by custom freight carrier only.
NEW !! - AMBER NOW AVAILABLE IN TWO SHADES!. The original amber part number F007-043 has been re-named Amber/Yellow. It's still the same product, just with a new name. The new amber part number F007-043A is called Dark Amber. This shade of amber has more red which pushes the 99.9% filtration all the way out to 530nm.
NEW !! - T5 CLEAR NOW AVAILABLE IN SPECIAL HIGH TEMPERATURE DESIGN!
This patented end cap design resists the high temperatures that 54 watt T5 HO style tubes can generate. The cap is longer with a special flair pattern which allows for proper heat dissipation. New end caps are made from a special UV Stabilized polycarbonate with a point of deflection of 226°F (108°C)
CON-TROL-CURE® UV Filter Sleeves are flexible plastic filters designed to fit over any size diameter standard fluorescent light tube. Amber Sleeves filter UV light up to 500nm, Clear Sleeves up to 400nm. No tools are required for installation. The UV Inhibitor in UV Filter Sleeves never wears out and never needs replacement. Made of polyester and can withstand high heat. Available in 4' lengths in clear or amber. Use 2 sleeves to cover an 8' fluorescent bulb.
F007-001 4' CLEAR FILTER SLEEVE
Part Number - F007-003 4' AMBER FILTER SLEEVE
Modern lighting can cause eye strain and headaches caused by bright lights in offices, schools and buildings etc. Many of these new lighting systems offer substantial energy and cost savings but at the expense of discomfort to those that have to work in the environment.
Our corrective filter sleeves are the answer; they are simple to install and can reduce glare and ultra violet transmission. The UV226 clear ultra violet filters reduce the UV emission by 99% and do not change the actual appearance of the light being emitted.
In addition, we can offer sleeves for reducing lighting glare that are available in three grades: Filter 209 reduces light emission by 1 light stop (25%) Filter 210/N reduces light emission by 2 light stops (50%) Filter 211/N by 3 light stops (75%) approximately.
Each can be further enhanced to also reduce 99% of ultra violet emissions, thus creating an ideal working environment.
226 Clear UV Strongly absorbs UV light (99%) 209 .3ND Neutral Density Reduces light 1 stop (25%) 210/N .6ND Neutral Density Reduces light 2 stops (50%) 211/N .9ND Neutral Density Reduces light 3 stops (75%)
Correction filters are also available in over 40 special order colours
Rigid UV Filter Sheets Flexible UV Filter Sheets & Rolls UV Filter Sleeves & Florescent Lamp Covers Amber UV Filter Glasses
UV Equipment Spares
Replacement Reflectors
UV System Spares, Fans, Switches etc.
Replacement UV Lamps
© 2014 All rights reserved. | Design by TEMPLATED.
