SPATULAS & SCRAPERS
-    
     
     
Offering the widest selection of quality
spatulas and stirrers to ensure you have the correct tool
for every job. Use these spatulas for hand mixing,
scraping, cleaning etc. When choosing the right spatula or
stirrer, consider ink container size, viscosity and
material composition.
POLYPROPYLENE
52 INCH SPREADER
The
single-piece, injection molded 52" Polypropylene
Mixing Spatula is virtually unbreakable. Mix quantities of
inks and coatings without flex or fear of breaking. Cleans
easily for multi-use. Features a molded ergonomic grip and
is easy to handle at only 3 lbs. FDA approved.
J005-048
SPATULA
52IN W/HANDLE
NYLON
SCRAPER
The durable
multipurpose Nylon Scraper is ideal for use with UV inks
and coatings because of its resistance to chemicals. The
long, rigid scraper is molded of glass reinforced
polyimide. Overall length is 11-1/4" with a
5-1/2"L x 2-4/8"W flat blade. The straight,
chisel-type scraping edge may be resharpened. Tapered
handle provides a comfortable grip. Will not damage rubber
or plastic parts on-press. Ideal for screen and offset
printers alike. Sold individually or 6/case.
J005-018 NYLON
SCRAPER
PLASTIC
SPATULAS
CON-TROL-CURE™
Plastic Spatulas are made of flexible hard rubber, ideal
for mixing materials without scratching surfaces.
Resistant to UV inks, coatings and solvents. The Plastic
Spatula is designed with 4", 6" or 8"
blades. Sold individually or 12/case.
J005-001 SPATULA:PLASTIC
4IN
J005-002 SPATULA:PLASTIC
6IN
J005-003 SPATULA:PLASTIC
8IN
POLY
AND NYLON STIRRING PADDLE
Make large
scale stirring jobs safe and easy! Extended handle
Stirring Paddles minimize chance of contact between skin
and hazardous chemicals. The lightweight, easy to handle
CON-TROL-CURE™ Nylon Stirring Paddle has a 40"
handle and 4-1/2"L x 7"W blade. Will not
scratch, leave a black mark, or splinter. Prevents wear
and tear on equipment. Designed to sharpen itself during
use, never dulls. Sanitary, rinses clean effortlessly.
Made of high-density polyethylene, CON-TROL-CURE™ Poly
Stirring Paddle is perfect for stirring small volumes of
ink or coating within large drum containers. Paddle has a
36" handle and 3"W x 6"L blade.
J005-020 NYLON
STIRRING PADDLE 40"
J005-046 POLY
STIRRING PADDLE 36"
INK
SCRAPER
Full-sized ink
scraper features 7" angled blade for removing large
ink quantities from the screen well or print area.
Reinforced handle minimizes bending. Sold 10/box.
STAINLESS
STEEL INK KNIFE
Semi-flex,
CON-TROL-CURE™ Stainless Steel Ink Knives are ideal for
moving inks and coatings on-press during production or
changeover. Blunt, double-sided blade cleans easily.
Durable, walnut handle for comfortable, secure grip.
Available in 4", 6", 8", 10" or
12" blade lengths.
J005-041 STAINLESS
SPATULA 4" SQUARED
J005-042 STAINLESS
SPATULA 6" SQUARED
J005-043 STAINLESS
SPATULA 8" SQUARED
J005-044 STAINLESS
SPATULA 10" SQUARED
J005-045 STAINLESS
SPATULA 12" SQUARED
STEEL
INK SCRAPER
The Steel Ink
Scrapers are heavy-duty, wide-angle blades available in
semi-stiff, stiff, or extra-stiff stainless steel.
Semi-stiff and stiff stainless steel models have a
5"L x 4"W blade, while the extra-stiff stainless
steel scraper boasts a 6"L x 5-1/2"W blade. All
blades are mounted in an easy-grip, easy to clean walnut
handle. Resistant to most chemicals, UV inks, solvent and
water based inks.
J005-029STAINLESS
SCRAPER 4" STIFF
J005-030STAINLESS
SCRAPER 4" SEMI-STIFF
J005-031STAINLESS
SCRAPER 5-1/2" EXTRA STIFF
WOODEN
STIRRERS STIR STICKS
Wooden
Stirrers are ideal for mixing inks, coatings and
adhesives.
The disposable 6" Wooden Stirrers (J005-010) are made
of smooth, straight grained hardwood. They are very useful
for mixing and/or dispensing small amounts of inks or
coatings. They measure 6"L x 3/4"W. Sold
500/pack; 10 packs/case.
The lightweight, but sturdy 12", 14",
17.5", 21", and 36" Wooden Stirrers are
inexpensive and disposable. They're perfect for use with 5
gallon containers. The 12" Stirrer (J005-014)
measures 12"L x 1"W and is sold 1000/pack. The
14" Stirrer (J005-049) measures 14"L x
1-1/16"W and is sold 500/pack. The 17.5" Stirrer
(J005-059) measures 17.5"L x 1-1/8"W and is sold
448/pack. The 21" Stirrer (J005-058) measures
21"L x 1-1/8"W and is sold 627/pack. The
36" Stirrer (J005-057) measures 36"L x
1-1/8"W and is sold 500/pack.
The high-grade 12' Wood Stirrers (J005-061) are made of
sawn pine and are stronger than the standard stirs. They
measure 12"L x 3/4"W [5/32" thick]. Sold
1000/pack.
Wooden Stirring Rods (J005-017) are strong and sturdy
enough for all types of lab, experimental and formulation
work. Flat on one side for mashing; the other end is
pointed for reaching into corners and pinpoint stirring.
Easy to use and inexpensively priced for 1-time use. Each
Wooden Stirring Rod measures 8"L x 3/8" O.D.
Sold 100/pack.
| J005-010 |
SPATULA:WOODEN 6 INCH |
| J005-014 |
SPATULA:WOODEN 12IN |
| J005-017 |
WOODEN ROD STIRRERS |
| J005-049 |
14" WOODEN STIRRERS |
| J005-057 |
SPATULA:WOODEN 36 INCH |
| J005-058 |
SPATULA:WOODEN 21 INCH |
| J005-059 |
SPATULA:WOODEN 17.5 IN |
| J005-061 |
SPATULA: WOOD 12IN HG |
PLASTIC
DISPOSABLE SPATULAS
The handling
of inks, coatings and adhesives requires tools of
compatible materials. The Disposable Plastic Spatula will
allow easy clean-up and lend proper technical integrity to
the process. These nylon spatulas will not be affected by
the ingredients of most materials and solvents found in
the clean-up process. Priced very affordably to allow
convenient disposal when soaked with ink. They are
available in 2 sizes. 7-3/4" overall length:
3-1/2" blade L x 1-1/4" blade W. 11-1/2"
overall length: 3-1/2" blade L x 1-1/4" blade W.
Available in white only. Sold/dozen.
J005-007 SPATULA:PLASTIC8IN
DIS
J005-008 SPATULA:PLASTIC
11INDI
PLASTIC
INK KNIFE
Ideal for
screen and litho printers, the Plastic Ink Knives feature
a reinforced angled blade to facilitate ink and coating
transfer. One-piece, lightweight and solvent resistant
polypropylene construction will not damage rubber, plastic
or Teflon® press parts. Tapered handle to ensure a firm
grip. Available in 3 sizes. 13" overall length:
7-1/2" blade L x 3" blade W. 11" overall
length: 4" blade L x 4" blade W. 11"
overall length: 4-1/2" blade x 5-1/2" blade W.
J005-016
SPATULA:INK
KNIFE 3INW
J005-022 SPATULA:INK
KNIFE 5INW
J005-023 SPATULA:INK
KNIFE 4INW
PLASTIC
SPREADERS
The Disposable
Plastic Spreader is an all polyethylene flat scraper which
will not be affected by UV inks, coatings, adhesives or
clean-up solvents. This item is perfect for controlling
ink in the screen. Low cost allows for convenient
disposal. Each 5-1/2"L x 3-3/4"W scraper
features a tapered edge for cleaning. Sold/dozen.
The Mini Scraper is a pocket-sized version of the
Disposable Plastic Spreader. Measuring 3-5/8"L x
2"W, it is perfectly suited for manually pushing ink
from well to print area. Also useful in cleaning rollers
and screens. Sold/dozen.
J005-009 SPATULA:INK
3IN X 5IN
J005-050 PLASTIC
MINI SCRAPER
POLYETHYLENE
SPATULA
Polyethylene
Spatulas are excellent for handling UV inks and coatings
as well as conventional paints, adhesives and chemicals.
Non-spark, non-scratch properties are consistent for use
with high flash point chemicals. Solid, one-piece,
injection molded polyethylene construction ensures years
of use without rust or corrosion. Polyethylene Spatulas
will not scratch metal surfaces. Can be sterilized without
being damaged; no seams or cracks to encourage bacterial
growth. Tapered handle and thumb hole design provide
comfortable and sure grip. Available in 2 sizes:
9-7/10"L x 4-2/5"W or 8"L x 3"W.
Choose white or green. Green Polyethylene Spatulas contain
an anti-static agent which makes them ideal mixing and
scraping tools for paint and chemical clean-up.
J005-024 POLY
SPATULA 9-7/10" L x 4-2/5" W - WHITE
J005-025 POLY
SPATULA 8" L x 3" W - WHITE
J005-027 POLY
SPATULA 9-7/10" L x 4-2/5" W - GREEN
J005-028 POLY
SPATULA 8" L x 3" W - GREEN
SOFT
BLADE SCRAPERS
The Soft Blade
Spatula/Scraper is light, easy to use and sanitary. Will
not scratch, leave black marks, splinter or harm equipment
in any manner. The blade measures 7"L x 4-1/2" W
and is curved on 1 edge allowing unmatched, clean spatula
action. Blade will sharpen and contour to your specific
application with usage. Smooth finished, waterproof
construction is easy to clean with a simple rinse while
remaining odor free after repeated use. Short, easy-grip,
ribbed plastic handle. Total length: 13-1/2". Low
density Polyethylene Spatula/Scraper exhibits exceptional
flexibility and resistance to most chemicals and inks,
including solvent and water based inks. Nylon
Spatula/Scraper can withstand temperatures up to 300ºF
(Polyethylene construction can withstand temperatures up
to 150ºF). Sold individually or 6/case.
J005-015 SOFT
SCRAPER POLY
J005-021 SCRAPER:SOFT
NYLON
STAINLESS
STEEL SPATULA
CON-TROL-CURE™
Stainless Steel Spatulas offer semi-flexible, tapered
blades for excellent ink handling. Highly durable spatulas
equipped with rosewood handles are resistant to most
chemicals, UV inks, solvent and water based inks. Resists
rust; easy to clean. Available in 3", 4",
5", 6", 8", 10", 12" and 14"
blade lengths.
| J005-033 |
SPATULA:STAINLESS 3IN |
| J005-034 |
SPATULA:STAINLESS 4IN |
| J005-035 |
SPATULA:STAINLESS 5IN |
| J005-036 |
SPATULA:STAINLESS 6IN |
| J005-037 |
SPATULA:STAINLESS 8IN |
| J005-038 |
SPATULA:STAINLESS 10IN |
| J005-039 |
SPATULA:STAINLESS 12IN |
| J005-040 |
STAINLESS SPATULA 14" ROUNDED |
STEEL
SPATULA
The durable
Steel Spatulas are the ideal mixer for general shop needs.
Especially useful when mixing colors and cleaning ink
containers. Special high carbon steel blade, expertly
tempered to proper degree of flexibility. Hardwood handle.
The steel spatula is supplied with 4", 6",
8", 10" or 12" blade lengths. A 4" ink
scraper is also available to complement any of the Steel
Spatulas. The ink scraper is useful for more stubborn
jobs. The ink scraper features an angled edge with
slightly rounded corners.
J005-005 SPATULA:STEEL
6IN
J005-011 SCRAPER:STEEL
4IN
J005-013 SPATULA:STEEL
4IN
|
