4 Sided Die Collet Pick-Up Tools for die bonding, handling and component placement from SPT.

4 Sided Die Collet Pick-Up Tools

The inner inverted pyramidal walls of the Die Collet are used to hold the Die edges during pick-up and die placement. The die will fit into the tool cavity and its position will be automatically realigned with the Die Collet vertical Axis. Depending on the size of the die, different options have been made available in order to minimize die corner contact with the tool. Special reliefs are available under four different Die Collet designations :

IP : Inverted Pyramid ( no corner relief) for die size < 0.5mm
IPIR : Inverted Pyramid Inner Relief Corner for die size between 0.5 and 2.5mm
IPNC : Inverted Pyramid Notched Corner Relief for die size bigger than 2.5mm
IPCR Inverted Pyramid Corner Relief for die size bigger than 1mm is a less popular equivalent of type IPNC

ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - 4 Sided Die Collet Pickup Tool (IP)

4 Sided Die Collet Datasheet
Part Number - 4 Sided Die Collet Pickup Tool (IPIR)

4 Sided Die Collet Datasheet
Part Number - 4 Sided Die Collet Pickup Tool (IPNC)

4 Sided Die Collet Datasheet
Part Number - 4 Sided Die Collet Pickup Tool (IPCR)

4 Sided Die Collet Datasheet

DIE & COMPONENT PICKUP TOOLS WE OFFER:

CT CONICAL PICKUP TOOLS 2151-CT THREADED REPLACEABLE CONICAL TIP RT RECTANGULAR PICKUP TOOLS RTR/HRTR PICKUP TIPS RPCT REPLACEABLE PLASTIC PICKUP TOOLS FCTR/PCTR PURE CONICAL TIP RUBBER RTR-D2/RTR-D3 FRAGILE PART PICKUP TOOLS	2 SIDED DIE COLLETS 4 SIDED DIE COLLETS PERIPHERAL DIE COLLETS (PL) SC & HSC SUCTION CUP PICKUP TOOLS ST SILICONE TIP PICKUP TOOLS SPECIAL / CUSTOM PICKUP TOOLS SHANK STYLES AND TIP HOLDERS