This collet configuration is useful where tool access is limited. The die is retained against only two collet side walls. In the other direction, the collet tip (CW) is shorter than the die width (DW).
REQUIRED DIMENSIONS TO SPECIFY
Angle = Internal Cavity Angle
DL = Die Length (Not necessarily the largest)
DW = Die Width (Not necessarily the smallest)
DT = Die Thickness
OTHER OPTIONAL DIMENSIONS
DE = Die Engagement
CL = Cavity Length
CW = Cavity Width
CD = Cavity Depth
WT = Wall Thickness
TL = Tool Length (Not necessarily the smallest)
TW = Tool Width (= CW)
H = Hole Diameter
VR = Vertical Relief
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - 2 Sided Die Collet Pickup Tool (CH)2 Sided Die Collet Datasheet
DIE & COMPONENT PICKUP TOOLS WE OFFER:
CT CONICAL PICKUP TOOLS
2151-CT THREADED REPLACEABLE CONICAL TIP
RT RECTANGULAR PICKUP TOOLS
RTR/HRTR PICKUP TIPS
RPCT REPLACEABLE PLASTIC PICKUP TOOLS
FCTR/PCTR PURE CONICAL TIP RUBBER
RTR-D2/RTR-D3 FRAGILE PART PICKUP TOOLS
2 SIDED DIE COLLETS
4 SIDED DIE COLLETS
PERIPHERAL DIE COLLETS (PL)
SC & HSC SUCTION CUP PICKUP TOOLS
ST SILICONE TIP PICKUP TOOLS
SPECIAL / CUSTOM PICKUP TOOLS
SHANK STYLES AND TIP HOLDERS
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - 2 Sided Die Collet Pickup Tool (CH)
2 Sided Die Collet Datasheet
CT CONICAL PICKUP TOOLS
2151-CT THREADED REPLACEABLE CONICAL TIP
RT RECTANGULAR PICKUP TOOLS
RTR/HRTR PICKUP TIPS
RPCT REPLACEABLE PLASTIC PICKUP TOOLS
FCTR/PCTR PURE CONICAL TIP RUBBER
RTR-D2/RTR-D3 FRAGILE PART PICKUP TOOLS
2 SIDED DIE COLLETS
4 SIDED DIE COLLETS
PERIPHERAL DIE COLLETS (PL)
SC & HSC SUCTION CUP PICKUP TOOLS
ST SILICONE TIP PICKUP TOOLS
SPECIAL / CUSTOM PICKUP TOOLS
SHANK STYLES AND TIP HOLDERS