Conical Tip Die Pick-up Tools
Conical Tip Pick-up tools do not have replaceable tips. The body is mostly made by assembling a stainless steel holder into which the tip, made from another material is pressed. Other options are gluing or brazing if both materials are compatible. For small tip size ( < 0.4) , we recommend to use tungsten carbide (W) base material. Depending on the shank type configuration, the tool may be made from 1 single piece. This is generally the case for cylindical shanks with W tip material.
Special applications requiring Vertical Relief or Multi hole configurations are possible and shown hereafter:
When and Why to use CT: Various Choice of Tip Material Available in Very Small Tip Size Various ESD safe Tip Material Easy Tool Access to Substrate Various High Temp Resistant Material
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS & QUANTIY FOR QUOTE OR ASSITANCE)
Part Number - Conical Tip Die Pickup Tools
CT Pick-up Tools Datasheet
DIE & COMPONENT PICKUP TOOLS WE OFFER:
 CT CONICAL PICKUP TOOLS
 2151-CT THREADED REPLACEABLE CONICAL TIP
 RT RECTANGULAR PICKUP TOOLS
 RTR/HRTR PICKUP TIPS
 RPCT REPLACEABLE PLASTIC PICKUP TOOLS
 FCTR/PCTR PURE CONICAL TIP RUBBER
 RTR-D2/RTR-D3 FRAGILE PART PICKUP TOOLS
|
 2 SIDED DIE COLLETS
 4 SIDED DIE COLLETS
 PERIPHERAL DIE COLLETS (PL)
 SC & HSC SUCTION CUP PICKUP TOOLS
 ST SILICONE TIP PICKUP TOOLS
 SPECIAL / CUSTOM PICKUP TOOLS
 SHANK STYLES AND TIP HOLDERS
|
|---|